Home / Tundish Quick-Change Nozzle
Tundish Quick-Change Nozzle
A quick-change tundish nozzle lets the caster change the metering piece with less stoppage. Quotation is based on your current assembly, not on a guessed mechanism size.
Quick-Change Tundish Nozzle
The refractory body uses the same outer-body and insert typical values as the tundish nozzle TDS. Changer length, plate size and fit are taken from your drawing.
Tundish nozzle (outside)
| Property | Typical |
|---|---|
| Al₂O₃ | 75% |
| Fe₂O₃ | 1.2% |
| SiO₂ | 15% |
| Bulk density | 2.85 g/cm³ |
| Apparent porosity | 18% |
Typical value shown in the Tundish Nozzle TDS
| Property | Typical |
|---|---|
| ZrO₂ | 96% |
| MgO | 2.6% |
| SiO₂ | 0.04% |
| Al₂O₃ | 0.15% |
| Bulk density | 5.25 g/cm³ |
| Apparent porosity | 7% |
Please send your existing nozzle drawing or assembly dimensions. Mechanism sizes are not invented on this page.
10 mm11 mm12 mm12.5 mm13 mm13.5 mm14 mm14.5 mm15 mm15.5 mm16 mm16.5 mm
Request a Custom Tundish Nozzle
Write the bore and the main assembly sizes in the form. Send the drawing file by email or WhatsApp.
